mariobedayo
-
Posts
51 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Store
Articles
Gallery
Everything posted by mariobedayo
-
HI! Moses, How are you? May i ask again regarding your recommendation or advice regarding my present axle gears in my jeep zj 1993 4.0 as i will swap the xj 4.0 ax 15 with np231 TC, im using now the 31x10.5 tire. please advice Thanks. Mario Bedayo Philippines
-
HI Moses , How are you? just want to ask you regarding the throttle position sensor of my jeep zj 4.0 as i converted my jeep to carb. im using the holly 390cfm 4 barrel it run well, but sometimes the trans will not kickdown to 1ST gear sometimes it does . question... is is The TPS which is disconeected affects the kickdown? as im planning to install a tps made by holley. Also, if your bands are loose what's going to happen? Thanks for your time . have a nice weekend. In My Jeep zj 1994 4.0L engine AWD trans, do i need to re gear if i will use a 30- 31 tires and what gear and where to buy this gears. can i ask you regarding the TPS in the ZJ,does it affect kickdown or its the TCM that control this shifting? sometimes my experience is kickdown only up to 2nd gear and sometimes it goes to 1st gear, is it the adjustment of the kickdown cable ? is it lose or is it to tight? also you advice me before regarding the anti return valve in the trans i cannot locate it, also where i can buy this valve how do i check if its ok? , please advice me With all my Thanks. Cheers:, Mario Bedayo Philippines
-
Moses , In My Jeep zj 1994 4.0L engine AWD trans, do i need to re gear if i will use a 30- 31 tires and what gear and where to buy this gears. can i ask you regarding the TPS in the ZJ,does it affect kickdown or its the TCM that control this shifting? sometimes my i experience is the it kickdown only up to 2nd gear and sometimes it goes to 1st gear, is it the adjustment of the kickdown cable ? is it lose or is it to tight? also you advice me before regarding the anti return valve in the trans i cannot locate it, also where i can buy this valve how do i check if its ok? , please advice me With all my Thanks. Cheers:, Mario Bedayo Philippines
-
Moses , Thanks, How about if i use a 30 to 31 tire the 4.56 gear is ok in the 2.5L what can i do to add power to my 2.5L change cam change fuel injector or change the throttle body? How about if my engine in the xj is 4.0L with auto tranny, what do i need in this set up. your suggestion please. Cheers: Mario Bedayo Philippines
-
Hi! Moses< How are you? Can you give suggestion how to improve the performance of th jeep xj 2.5 if i install bigger tires ,also what are the things needed. Please advice Thank you. Cheers: Mario Bedayo
-
HI! Moses How are you? May i know your openion about jeep 2,5 diesel is good for daily driver how about off roading not extreme, and using 31 tires , also what are the problems about this model xj please advice me thanks. Mario Bedayo
-
HI! Moses < How are You Happy New Year...Can i ask your recommendation, . What model year cherokee xj that will fit for me for daily driving and sometimes off roading but not extreme. is the mnaul trans is good or automatic ? please advice me Thanks Cheers: Mario Bedayo
-
Hi, Moses, I need your help where to connect the HEI distributor wiring. Is it ok to tap via the ignition where the fuse is? and how do we connect these wires? Thank you. Regards, Mario Philippines
-
Hi! Moses How are you? I have a question regarding the 31x10.5 tire in my jeep Grand cherokee is rubbing in my fender as i was using a rim which is 15x8 backspace 4,75 can you teach me what to do , and can i use a spring rubber spacer leveling Kit of 3" please advice Thank you. Regards, Mario from the philippines
-
Moses, Thank you ... Mario Bedayo Philippines
-
Thank you Moses, how about the 2" lift is it ok for my Grand cherokee will i change shock? what can you suggest if im going to use the 31" tire? or what kit will i buy ? only for 2" lift . Thanks. Mario Bedayo Philippines
-
Hi! Moses How are you? can i ask you regarding 3' lift for my jeep 1994 Grand cherokee ZJ only to use the budget spacer to accomodate 31 x10.5 tires with stock spring and shocks, what can you suggest . Thank you . Regards, Mario Bedayo Philippines
-
Hello, Moses! Can you guide me on how to change ATF in my 1994 Jeep ZJ Grand Cherokee 4.0L 42RE transmission? How will I change fluid if I want to also change fluid in the torque converter? Can I do this thru the line going into the radiator? How many quarts do i need to change? Thank you... Mario Bedayo
-
Moses, Thank you... yes a new topic, my engine valves are ok so with the pistons and i see theres no oil in the top and not damage , i talk to my mechanic about the installation of the cams , he told me that what he did the rocker arm is to tight and the lifter maybe was not collapse , and now i told him you procedures, that what we are going to do. ill buy another set with that part number with the lifter and will install again following your instruction. still i will use comp cams.i know you are not advertising, but it serve you well, Thank you Very much. Regards. Mario Bedayo
-
HI! Moses, Mario Again, May i know please the comp part number as im confuse as i look to summit and ebay im not sure . is it CL 68 200-4 252H grind? As my cam was not serviceable any more as the mechanic installed the wrong way so ill buy another one, i took about a year of service then my jeep misfire no power. when we open the engine bent pushrod the lobe of the cam was not an egg shape any more the lifter l hole in the center, but its only 2 lifters and 1 lobe and cams cannot be repaired your right maybe he installed the lifter full of oil. this is a lesson i learned and will cost me money. i know your recommending a comp cam. im afraid it will happen again , but this time will follow all instruction from you. how about if i use crower cam any advice please. Thank you again. Mario Bedayo Philippines.
-
HI! Moses, Mario Again, May i know please the comp part number as im confuse as i look to summit and ebay im not sure . is it CL 68 200-4 252H grind.? AS my cam was not serviceable any more as the mechanic installed the wrong way so ill buy another one , i took about a year of service then my jeep misfire no power. when we open the engine bent pushrod the lobe of the cam was not an egg shape any more the lifter l hole in the center , but its only 2 lifters and 1 lobe and cams cannot be repaired your right maybe he installed the lifter full of oil. this is a lesson i learned and will cost me money. i know your recommending a comp cam. im afraid it will happen again , but this time will follow all instruction from you. how about if i use crower cam any advice please. Thank you again. Mario Bedayo Philippines.
-
Moses, MUCH THANKS.... Mario Bedayo Philippines
-
Hey Moses, Your amazing!!! Man, i dont know how to set valve timing correctly want to learn from the Master. also what trans fluid will i use as atf +4 is very very Rare here to find what we have here is syngard valvoline what atf will i use dex 3 ? or mercon , i dont know what fluid the first owner use and what youve advice to change the filter and fluid so i want to change, need your advice about this.another thing My friend... what can you recommend for my set up, in the engine. is the comp cam 252H grind is ok or do you have another recommendation want a little faster in highway and got accelaration when to overtake in the city with lot of traffic.my car is carburated. it has still good engine . it doesnt smoke and what octane will i use here 95 Ron is ok ? Thanks .Have a nice weekend. Mario Bedayo Philioppines
-
Moses, I will follow what ever you say... im using an Hei aftermarket distributor where do i start my timing as im using carburator, the 390cfm holley 4 barrel. thanks you . Mario Bedayo Philippines
-
Moses, How are you? im going to ask you some question, i want to use the comp cam 252 is it possible to use the stock lifters push rod and springs? also what is the push rod height ? 9.639 is ok?, im just asking again your advice, i will follow your advice regarding to collapse the lifter first , pls. also guide how to tighten the rocker arm and the push rod.or is there any article or video that i can follow how to do it. your recommendation .... thanks. Regards to you Mario from the philippines.
-
Moses, All my thanks to you... and the advices do appreciates. ill keep in touch, The kilometer reading is 114,000 Km in my Jeep. Mario
-
Moses Thank you for the highlights regarding the AX-15 yes , your right if theres nothing i can do ill move to that conversion Ax-15, actually , what happened is im preparing if my 42Re will give up as here in our place in the south of the philippines theres no service center for this Trans, there are shops that work on the trans but more in the japanese models. also i ahve a problem in my 42 RE as it was converted From EFi to carburator. after a year of run good , i have this problem hope you can give some inputs , first start about 2 min, when i engage in drive the GC is hesitant to move but when i engage in reverse it moves imediately also in first gear it move with no problem, and then later when you engage in drive i feel it engages and it move with out problem. but if i try to hurdle a road gutter for about 6 inches in a dirve move it cannot hurdle. if in first gear or 1 its can. manage. please give me some highlights in 42RE and what to do. my carb. is 32/36 weber, do i need to change carb. to a bigger one? you know i follow your advice for the comp cams, what happened i change back to original cams as the comp have my push rod bind a little even to i install the comp cams hyd. lifters,and i got that problem can you give please some inputs, my friend would like to give me a clifford hyd.cams 264 plus the kit is this good for my jeep 242 4.0 as he told me it is design according to clifford for that engine with a carb. set up. Hoping you're not bored for so many questions i ask but your the only person who knows in cars...Thanks. Your Friend from the philippines, Mario Bedayo
-
Moses, thank you for the advice , if i find one Xj Ax 15 trans, will my existng T case will fit , my trans is 42RE quadra trac Tcase NG 249 its a grand cherokee limited 1994 242 4.0 , is there any wiring harness for this, i see in youtube the trans swap and they have this neutral switch, correct me please if im wrong whats the purpose of this, also if i convert my tranny can i still use my AWD Hi and Low seating. ? thnak you again, Mario Bedayo Philippines
-
Hi! Moses, how are you? can i ask your advice regarding the tranny swap for my 242 1994 grand cherokee limited awd. i want the manual 5 speed , can do that ? can you please guide me what to do and the parts that in going to buy either a serviceable one , i know i can get it in ebay. my 42RE is going to end and theres no good repair shop here for the tranny 42 RE and it will cost me a big amount . Thank you. Mario Bedayo Philippines
-
Hi! Moses...Mario from the philippines, I'm the one who converted the 1994 Jeep grand cherokee 4.0 EFI to carburetor (weber 32/36) the car runs ok, only i have this problem that i dont have rpm indication in my dash, also i have ABS warning light that illuminate always. When i start the car all indication in the dash is off no check engine and no abs illumination, but i dont have a voltmeter indication, after about 3 minutes or sometime 6, i have check engine light and RPM start to indicate and also ABS start to illuminate as long the car is running , it runs ok but i dont have rpm and ABS light illuminate. I fit my car an external voltage regulator ERCK which is for dodge and chrysler and jeep. I have always had a voltmeter reading, and my battery is charging. Do you have any advice so that i have an RPM indication in my dash? Regards, your friend from the Philippines, Mario Bedayo