retiredfire

Thanks for the reply Moses. I started tearing down the one that I bought off of ebay today and the only thing that I find that I'm not sure about is when I take the two screws out of the fuel regulator, one has a bigger ball in it and the other has a smaller ball with a larger ball on top. From what i am seeing there should be a weight on top of the smaller ball. This makes me wonder if someone rebuilt it and either lost the weight or whatever but put the larger ball on top of the smaller one for the same affect. As far as plates with numbers there aren't any on my original one or the one that I bought.

My 64 Scout has a 1904 carb that I have rebuilt and gone thru a couple of times but can't get it to quit flooding gas out of the "vent" hole on the top. I was going to replace it with a aftermarket but the choke linkage is 180 degrees off compared to mine. I had thought that I found a used one on ebay but it turns out there are two different size flanges that mount to the motor and that one doesn't fit. I have taken mine off and on so many times that now the fuel line is stripped and won't tighten. I am really tired of messing with it and just won't something that will work. Any help would be appreciated.