[94 YJ with 32RH transmission cooler fittings?]

Thanks, I think I'll probably make some lines AN lines. So the forums will be closed? Is there plans to reopen them at some point?

[94 YJ with 32RH transmission cooler fittings?]

Thanks for the info. The dorman fitting is a quick connect also but has a different style of quick connect that is hidden inside the fitting. It says it will work on 3/8 tubing so I think it might work. I haven't tried to connect it to my tubing yet since I don't have a removal tool yet and I don't want to mangle it with a screwdriver like I did the original quick connect. Is it advisable to try to use just 3/8 flexible hose for the entire cooling lines? I've found 1/4 x 18 NPT to barbed fitting that would probably work if I just went with hose but I don't know if this is advisable? There are two problems with the original lines. One is that they are crimped onto a short section of hose near the radiator that are leaking. Second, the original quick connect is pretty grimey and I mangled the little wire quick connect piece that holds the quick connect in place.

[94 YJ with 32RH transmission cooler fittings?]

I've attached a photo of the old fitting that came out of the transmission case and a new dorman fitting part # 800-610 that cross referenced the mopar part 04617517. The dorman quick connect fitting says its a 1/4 x 18 NPT thread?  It seems to thread into the transmission case fine so I guess that's the size? The quick connect end is different though but says it will fit 3/8 tubing. I haven't tried the quick connect end yet. 

[94 YJ with 32RH transmission cooler fittings?]

Hi, I'm working on a 32RH and I'm trying to replace the cooler lines coming out of the tranny. I've got the tranny out of the Jeep and was degreasing the exterior. I used some 1/4 NPT plugs to plug the ports while I cleaned it. They started to thread in by hand but bound up pretty quickly just finger tight. Fine for keeping crud out while I cleaned but if I need to replace those fittings I don't think they're really just 1/4 NPT. Are cooler lines a different type of thread? The original quick connect fitting looks possibly tapered? Also wondering if Jeep still sells this quick connect fittings? I didn't see any that matched online.

Jamey