[Need Installation Details for a Mopar Performance MPI/EFI Conversion Package]

Looks like my pump is bad. I removed it and placed 12volts to it. Nothing! Any idea of the replacement pump? I will go to the Hesco and see if I can find it.

[Need Installation Details for a Mopar Performance MPI/EFI Conversion Package]

Thanks! I have traced the green with black stripe back to the relay. I cant figure out why I dont have power to my fuel pump. It should at least have power for a second until it has pressure correct. I found what looks like the main fuse and its good. I hear the relay click on then back off but still nothing at the pump. Maybe a bad connection at the pump. I will pull wires and check just the wires for 12v.

[Need Installation Details for a Mopar Performance MPI/EFI Conversion Package]

On 7/29/2014 at 6:08 AM, Moses Ludel said:

earlier MPI version

I know this thread is old but I have this version I think. I am trying to troubleshoot the fuel pump and I cant seem to find any wire diagram for this. I can see the Brown with black line running from the positive connection on the pump but cant seem to find where it goes. Any ideas? I was told by the previous owner that the kit uses things off of the 94 yj.