Jump to content
nvordie

97 Geo Tracker soft top hardware

Recommended Posts

The previous owner of my 97 replaced the soft top with a hard top and trashed all the hardware. Is there a drawing or pictures that show all the hardware required to revert it back to a soft top. I ran across a 93 that has some of its hardware is it compatible? Any help would be greatly appreciated.

Share this post


Link to post
Share on other sites

nvordie...You will need access to a factory parts manual(s) that cover 1993 and 1997 model years.  At that point, compare the part numbers for your 1997 OEM soft top pieces with the pieces used on a 1993 model Tracker.  The factory/GM/Chevrolet parts manuals will illustrate what you need and help you determine which parts are missing.  Any interchange between the model years would be the parts that use the same part number.

The replacement top kits for 1993 and 1997 are not the same.  Here is the replacement top (the cloth only, no bows) for a 1997 Geo Tracker.  If you can get the hardware from a donor vehicle, here is the cloth set:

https://www.morris4x4center.com/rampage-oem-replacement-soft-top-black-diamond.html  (1997)

Your local Chevrolet dealership may have older parts manuals or microfiche, maybe even a PDF manual that covers your Tracker.  The parts listing and illustrations can confirm the parts you need. 

Moses

Share this post


Link to post
Share on other sites

×
×
  • Create New...