Search the Community
Showing results for tags 'reverse'.
Found 1 result
Hi to all, Hoping to get a little guidance! I recently completed a rebuild of the AX15 with a master rebuild kit which was uneventful. When it was completed and bench tested, it shifted rather smoothly into all gears, except reverse. It took a few tries each time, but the reverse gear would engage and the output shaft would spin in the opposite direction with no issues once it's engaged. Having read a lot about difficult shifting just after a rebuild, we thought little of it and installed it in the car. Now, we are still having the same issue, but worse. The transmission won't at all shift into reverse, and feels as if something is blocking it. There's no grinding or partial engagement of the reverse idler gear whatsoever. Even with all but the most extreme force, it still feels like there's a hard stop just in front of the reverse range. We managed to force it into reverse (luck?) maybe twice since it's been installed in the car, and it moves the car beautifully backwards with no noise, clunking, grinding, or popping, but as soon as it's returned to neutral, the same issue occurs again. We took it out for a test drive and let things get nice and warm, and it shifts wonderfully into all 5 forward gears, but the reverse is still absent. Any ideas what could be going on? Do I have to drop the transmission? The shifter isn't binding on/hitting the body or console as we've removed all that and it had no difference. ? Here's a video of the issue. Thanks in advance for any advice. InShot_20180312_025446985.mp4