Search the Community
Showing results for tags 'manual'.
Found 3 results
Hi to all, Hoping to get a little guidance! I recently completed a rebuild of the AX15 with a master rebuild kit which was uneventful. When it was completed and bench tested, it shifted rather smoothly into all gears, except reverse. It took a few tries each time, but the reverse gear would engage and the output shaft would spin in the opposite direction with no issues once it's engaged. Having read a lot about difficult shifting just after a rebuild, we thought little of it and installed it in the car. Now, we are still having the same issue, but worse. The transmission won't at all shift into reverse, and feels as if something is blocking it. There's no grinding or partial engagement of the reverse idler gear whatsoever. Even with all but the most extreme force, it still feels like there's a hard stop just in front of the reverse range. We managed to force it into reverse (luck?) maybe twice since it's been installed in the car, and it moves the car beautifully backwards with no noise, clunking, grinding, or popping, but as soon as it's returned to neutral, the same issue occurs again. We took it out for a test drive and let things get nice and warm, and it shifts wonderfully into all 5 forward gears, but the reverse is still absent. Any ideas what could be going on? Do I have to drop the transmission? The shifter isn't binding on/hitting the body or console as we've removed all that and it had no difference. ? Here's a video of the issue. Thanks in advance for any advice. InShot_20180312_025446985.mp4
i have searched the internet far and wide I need a service manual for a 1969 international scout 800a that I recently picked up...I have owed close to 40 vehicles in my life and I've never not been able to find a FREE digital copy of the service manual for a vehicle....it's really sad when scumbags are charging up to $200 for a copy! When I find one or if someone has a paper copy (around 988 pages)I have the ability to convert it to digital I will share it from here to Texarkana to help others like myself to keep these old corn binders on the road....let me know in my PM if you have one or a copy you can share via google docs thanks in advance!
I have attached a few pictures of this transmission I have but I don't know where its from I need help identifying this transmission the only thing I can identify here is the transfer case because it has the sticker in the back its an NP "new process" 249 J This is a manual 4wd transmission I believe its an ax15 transmission but please give me your input as i'm not sure any help is appreciated one more thing from the shape of the bell housing I don't think this came of a Jeep possibly AMC or other but thanks again