Happy Thanksgiving to all! I've posted before that my CJ-7 has a Cherokee 4.0L in it, but it's not really that simple Here is the history as I know it or can guess from some evidence: 1. Originally a 258/4.2L straight six with the FrankenCarb--this one was sold in California, so I'm sure it was extra-special. 2. MOPAR EFI kit added to the 4.2L. It seems this addition happened sometime after 2000, as the MOPAR labels for the kit have a 2000 copyright on them. I learned from the shop that did most of the work on this Jeep that the lady I bought it from purchased it sometime around 2001. It was owned by 1 family prior to that (1983-2000?). I suspect the Skyjacker lift and sketchy paint job happened about the same time to make it ready to sell. 3. The 4.2L finally gave up in 2014. This engine was replaced with a junkyard 1995 Cherokee 4.0L last May; engine had about 155K on it at that time. I never really knew which version of the MOPAR EFI kit I had, OBDI (with fuel return line) or OBDII from the newer models (returnless). There was also the option that they pulled a complete 1995 engine including the EFI and junked the old MOPAR kit. I just didn't really know. I've done some more research and taken some pics to see if anyone can confirm what I've come to believe. It seems like my system matches the pictures I've seen of a single rail EFI system. That would mean it is: 1. 1997 and newer 2. Returnless 3. OBDII I mostly ask these questions because I've been looking at performance options for whenever I'm forced to rebuild this engine. I really think I want to leave a Jeep engine in there, as opposed to a small block Chevy, for example. It seems like most systems (supercharger, programmers, etc.) are dependent upon the OBDI VS. OBDII distinction. With a 1995 engine, I wasn't sure which items I should be looking at. Assuming this is a 1997 and newer-style EFI kit, I assume I should only look for performance items for the newer model engines, correct? I don't think there was much other than heads (I have the supposedly better casting) that varied in those mid 1990's engines, other than the EFI/PCM. 1. Can I conclusively say this is a returnless/1997 and newer EFI kit? 2. Is this the OBDI/OBDII port I'm showing in the picture? It is about 8" down the main wire harness from the MOPAR EFI kit PCM. Regards, Case