Search the Community
Showing results for tags 'cj7'.
Found 2 results
I drained the Dana 300 on my '84 CJ-7 and found the bits of metal shown in the attached photo. I also found, not pictured, what looks like half of a plastic sphere about a 1/4 inch in diameter. I have looked at several exploded diagrams of transfer cases and cannot find anything that resembles what I found. Any suggestions as to what these bits are from? Thanks
Moses, I know this is a controversial topic, but this may be the place for discussion. I am interested in participating in a JJUSA event here in KY. One of the vehicle requirements is that the overall lift including any body lift not exceed 6". The lift on my 85 CJ7 will be real close to the limit. I have inquired JJUSA by phone and email trying to find out how and what parameters they will be using to determine vehicle lift. JJUSA has not responded, leading me to believe they don't have quantifiable parameters or are afraid to tell me in writing. I am concerned of showing up to the event after paying $500 and being disqualified and turned away without a refund. With all that being said, Is there a measurement that can be taken from axle centerline to a point on the fenders or body tub? My sheet metal and fender flares are pretty much stock, however not much stock underneath. SOA, Dana 44's front and back, reversed spring hangers, modified shock mounts, 1" body lift, etc. Thanks William