Search the Community
Showing results for tags 'Jeep ZJ'.
Found 9 results
-
Hello, Moses! Can you guide me on how to change ATF in my 1994 Jeep ZJ Grand Cherokee 4.0L 42RE transmission? How will I change fluid if I want to also change fluid in the torque converter? Can I do this thru the line going into the radiator? How many quarts do i need to change? Thank you... Mario Bedayo -
HI! Moses, How are you? again another request from you, can teach me how to connect the Tachcometer and speedometer after my tranny swap 42RE to ax15 please teach me what to do.. Thank you. Regards, Mario Bedayo Philippines.
-
Hello, this is my first post I've done a fair share of trouble shooting and research and cannot figure this out. 94 Jeep Grand Cherokee Laredo. 5.2 v8 I've attached a video. Basically, the jeep will roll over and not start. If I leave the key in the power on position for 5-10 minutes, the relay box will start clicking like that. It changes rhythm and sound. Then stops clicking. The jeep will start and run fine. If I turn it right back off it will usually have to sit with the key in on position again and do the clicking before it will start again. Albiet, the second time it only takes a couple minutes to be ready to start. Any help is appreciated. Thanks in advance. My_Movie_12.mp4 -
HI! Moses, How are you? May i ask again regarding your recommendation or advice regarding my present axle gears in my jeep zj 1993 4.0 as i will swap the xj 4.0 ax 15 with np231 TC, im using now the 31x10.5 tire. please advice Thanks. Mario Bedayo Philippines
-
Moses , In My Jeep zj 1994 4.0L engine AWD trans, do i need to re gear if i will use a 30- 31 tires and what gear and where to buy this gears. can i ask you regarding the TPS in the ZJ,does it affect kickdown or its the TCM that control this shifting? sometimes my i experience is the it kickdown only up to 2nd gear and sometimes it goes to 1st gear, is it the adjustment of the kickdown cable ? is it lose or is it to tight? also you advice me before regarding the anti return valve in the trans i cannot locate it, also where i can buy this valve how do i check if its ok? , please advice me With all my Thanks. Cheers:, Mario Bedayo Philippines
-
Hi, Moses, I need your help where to connect the HEI distributor wiring. Is it ok to tap via the ignition where the fuse is? and how do we connect these wires? Thank you. Regards, Mario Philippines
-
This V-8 powered Jeep Grand Cherokee has a low-speed hesitation. I answered the owner's questions with engine and powertrain troubleshooting recommendations. The NV249 transfer case is also discussed: The information could prove helpful to Jeep ZJ Grand Cherokee owners and also Dodge Ram and Dakota owners with 5.2L V-8 powered trucks. Moses -
In 1984, AMC/Jeep® took its unitized body and 4x4 technology into the XJ Cherokee platform. This breakthrough compact SUV became the best selling model of its era and made the AMC sale to Chrysler profitable. These models and the subsequent Jeep ZJ and WJ Grand Cherokees feature beam axles front and rear, two-speed transfer cases and rugged engine packages, making them candidates for off-road upgrades and 4x4 trail use...Welcome to the XJ Cherokee and ZJ/WJ Grand Cherokee community at 4WD Mechanix Magazine!—Moses Ludel At left is a ZJ Grand Cherokee equipped to tackle the Moab Area BFE course! Reno Off-Road Motorsports Expo (center) is one more place to see the owner enthusiasm for the XJ Cherokee! At right, the magazine's 1999 XJ Cherokee multi-tasks, pulling the Caravan trailer and our XR350R Honda dirt motorcycle!
-
Hi, I am new here and would like to know if anyone has had a similar problem. I need to change the ball joints ('97 Grand Cherokee ltd) ... The MOOG ball joints are as good as the OEM? The measurements are different from those installed in my car. Thanks for any advice. Kazu
