Ok, got my subscriber membership now.
So, after not doing much with the jeep the past couple winters due to my snowbike hobby I jumped back in yesterday. I have to reassemble the front axle and clean the rear axle housing. I ran into trouble with the new front wheel studs that came with my new wheel bearing hubs. There is a shoulder behind the knurled section that would not allow proper press-on fit. The jeep parts vendor sold me the wrong studs it appears. Napa was able to look up studs for a scout and I was able to look at one to confirm it will work. A second problem I found was my new rotors that I purchased almost 3 years ago. I went to test fit one and found that the hub hole is too small, under 4” and it needs to be over 4”. They are for a 81-86 CJ. I’m guessing I need mid-70’s.