Jump to content

biggman100

Members
  • Content Count

    340
  • Joined

  • Last visited

Everything posted by biggman100

  1. Moses, i know, but, sometimes, i tend to overlook the obvious. I think it is a flaw that develops over time if you do something enough times.
  2. Honestly, your best bet would be to talk to some of the security guys in any major IT dept security section, or, look for forums dedicated to security and app building. It also depends on if your planning on an open source or closed source app, as well as what platform it will be for, I.E. Android, Windows, Apple. Each of those platform have risks, but, those risks are platform based. I'm not an expert, but i do know open sourced, Android apps are typically less prone to attacks than windows based apps, but are also, since they are open sourced, easier to copy. Look on the google play store, a
  3. An update on this, and a bit of an anecdote. To me, its kind of funny in a couple ways, but, the car got wrecked. Noone was hurt, and noone was even in the car, as she was at work, and someone on their phone wasn't paying attention to what they were doing, and hit it so hard they pushed it 300 feet. Granted, they were in a fullsize Ford F-250, but, i still wonder how fast they were going in the parking lot. The reason it is funny to me in a way is due to the comment Moses made about how distracting the radio was. I left the radio in for about two weeks, then, since it was still winter, when we
  4. I know this is an older post, but, i would like to add this for anyone who comes across it. I had several different BII's, most notably a 1987 with a 2.8 and manual trans, and a 1989 with a 2,9 and manual trans (that a tree crashed onto in a storm, but that is another rant for another day. I still miss that one though), and, with over 150k on the 89, all stock, i could go many places in 2wd, that guys in bigger pickups had to get to in 4WD. They are very capable little vehicles, and, if found in good shape, and decently maintained, will take a fair amount of abuse, as long as it is only occasi
  5. Moses, this was another one of those, waiting on money situations, but, i finally got back to it, and found a laundry list of problems, mainly because he had someone try to "help" him fix what he thought was wrong before bringing it back to me (to try and save himself money, which rarely ever works out). The rear trans mount was somehow melted, and one bolt was broke off in the housing, the TC AND front diff were completely destroyed ( i did however, find out that the truck is AWD and not 4WD, an error on my part), a motor mount was loose (his "helper" couldnt get it out, so he just left the b
  6. Moses, after $3800, and some common sense, the 4WD issue has been fixed. Due to tires being of different makes, as well as having a nearly bald tire, it was ultimately responsible for destroying the TC, front axle, encoder motor, as well as a few other minor issues. One thing i learned in all this is, if you have a newer, say around 2002 and up, full time or part time, 4WD system, always, always, always make sure the tires are as matching in size, tread depth, and wear ratings.
  7. Benji, another thing to consider is where you live. I know that in the states, especially in some states, a gas to diesel conversion wont allow it to pass emissions, mainly since, with a PCM/ECM swap, the vin in the donor PCM wont match the window sticker or registration sticker, and in many states, especially those that do emissions testing, like here in N.Y., that is an automatic inspection fail (that way, you cant just swap any ECM/PCM from the scrap yard into your vehicle, without paying for reprogramming).
  8. Moses, something to add, as i recently learned. Not all spacers are made equally, being that, some of the less expensive ones aren't always truly round, as we found out in an experiment on my brothers truck. He had an odd shimmy, but it only seemed to be in one wheel, but, when he changed to new all billet spacers, it got even worse, then he went to another, higher priced brand, still billet, and, in 1300 miles, not once has the shimmy came back. We took his original spacer and put in dead center on a lathe, and the inside diameter was out of round more than 20MM, then we tried 2 of the second
  9. I finally got back to this, and even after replacing the rear drums, still didn't fix the issue. However, thanks to my youngest, the issue has now been resolved. One day, while we were outside, i went to get something out of the truck, and, she says, daddy, that tire looks funny. I happen to look to see what she was looking at, and, sure enough, the front tire had not only a bulge in it, but very obvious signs of a broken belt, since the tread pattern didn't go straight anymore (I have taught my children from a young age little things to look for on vehicles, hoping that, as they become driver
  10. Moses, it is an open diff, and, as much as it pains me to say it, this is one time i wasn't thinking, and overlooked something important. Both rear wheels were off the ground, and, as i turned one one way, the other would turn the opposite direction, as they are supposed to. Today, after rethinking it, i jacked up one side, left the other side on the ground, and the wheel wouldn't turn unless it is in neutral, with the same result when i checked the other side, just as it is supposed to. However, i may have solved this one. I wont know for a few days though. As i was messing with some other st
  11. I am having an issue with the 4WD in a 2004 hummer H2. It was checked by a dealer, who finally determined that the transfer case motor was bad. After replacing it, it still seems to have pretty much the same issue, which is, it almost acts like it is stuck in 4HI, especially when cornering. We took it back to the dealer, and, now they are saying that because one tire, the right front, is less than 3/32ds tread, that is why it is still acting that way. Has anyone ever heard of that happening before? I know that having different size tires can cause major issues, but i have never heard of a tire
  12. Hi guys. On my 1994 dakota 3.9 5 speed, it recently developed the oddest vibration, but, only in the rear, and, is worse at lower speeds, such as 20MPH or less. The vibration is so bad, that with my 4x8 utility trailer, it actually made the trailer slide side to side while moving. I have had the wheels checked, as well as swapped tires around, with no change, so, the other day, i decided to lift the back completely off the ground, and, noticed that with it in gear, engine off, i can rotate either wheel, and they seem to spin fairly freely. I always thought that at least one wheel, most likely
  13. Jintia, welcome. The swap is possible, but, you would need a complete donor truck, as you would need the transmission, clutch, flywheel, ECM/PCM, complete wiring harness, clutch pedal assembly, gauge cluster (there are minor differences with the auto and manual gauge cluster, such as the shift light), and may also need the transfer case and driveshafts. Another potential issue is that if you have an automatic truck cab, it may be designed a bit different, and the clutch pedal and components may not be able to work with your cab. There are differences in the 1991 to 1996 manual and automatic ca
  14. Moses, as always, thank you for the advice. After actually discussing it with the owner, i think the only remedy would be to replace the TC, since i have since found that it was doing it from the time i replaced the trans, or shortly thereafter, and it has been at least two months now, with several trips on the highway of at least 40 miles each, and, due to other issues with it, just replacing the control switch may not help the other issues. Most likely, i am just going to replace it using the one from the vehicle i took the trans from, since i know that before that engine went, there were no
  15. I am having an odd issue with a 2004 Explorer. In park, and while driving, it makes an odd grinding noise near the end of the trans where the TC connects. In park, the higher the RPM's, the louder the noise. After a roughly 40 mile, mostly highway trip, it was spewing gear oil from the front axle vent, which leads me to believe the TC is stuck in 4WD, but, it isnt a full time AWD TC, it is part time. I have never seen this happen with any other vehicle. Another odd issue is that, especially at lower speeds, the 4X4 light on the dash will constantly flash, which makes me think it is constantly
  16. If you search the forums, the E4OD is a pretty popular topic. The 94, if i remember, wont show any lights for the trans. When is the last time you changed the filter in it? I know you said the fluid looks good, but, if the filter got plugged, the fluid may not have been ale to get through it, and sometimes, even with good fluid, it can have a bad filter. Im not really a Ford guy myself, i work more with Dodge trucks, but, i have seen that happen on quite a few Ram's and Dakota's.
  17. Bjorne, although i dont know much about the scouts, i do know a lot of original parts have been either sold off, or no longer made. However, there is a site, www.scoutparts.com, that may be able to help you in finding info on the parts you need. They also, at least from what it appears, sell a 19 gallon tank, although i dont know if that is a factory replacement, or a modified, made to work redesign. Hope this helps.
  18. Rarecj, this is a diagram of the E-brake switch on my 1994 Dakota. The switch is screwed into a bracket on the top of the pedal assembly, and has 3 wires to it. One is a ground, one is the power in from a switched source, and the third is a light output. It works on the same principle as a brake light switch, but, if you wire it so that it has a fused, switched source, then the third wire only gets power once the pedal is depressed, you can use any type LED, or even a regular dash light for the warning light. On the light side, hook one side to the wire coming out of the switch, and one to an
  19. Engine combinations, swaps, and tips, could fill an entire page, or maybe even more. For example, i recently learned that the 1992 to 2002 3.9 and 5.2 long block, without the intake and exhaust manifolds, are exactly the same, but, there are also a bunch of sensors and little stuff that need to be changed, whether you are using the 1997 to 2002 long block in a 1992 to 1996, or using the long block in a 1997 to 2002. There are also a host of tips and tricks on swapping the Hemi into the 1992 to 1999 trucks, and it just goes on and on.
  20. Moses, i havent actually gotten any of them apart yet, due to scheduling conflicts with the owner, but, when i looked up the gasket for them, it looks to be a regular paper style gasket. I wont be doing any of them until next weekend, so i will find out for sure then. I thought it was odd about the leakage, and about using silicone, since my Dakota, and my step dads Ford both have a reusable gasket. Ill let you know what i find when i get ready to get them done.
  21. I recently found an issue on a 2003 Yukon, a 2004 Avalanche, and a 2001 Tahoe, all are 5.3, all auto. The issue seems to be that the rear axle cover will leak, and as it gets low, will cause the same noise that a front wheel bearing will make, the droaning, swishy sound. I had to take the avalanche i was working on to the dealer, since i and the guy who own it both swore the noise was a front wheel bearing. It seems that all of these vehicles have a common problem with the rear axle cover leaking, due to an issue with how the gasket is made. A tech friend at a local dealer said that to fix it,
  22. I know this is an older post, but i just came across it. My neighbor does something along these lines, only he recycles the pallets into large playhouses that he then sells, or donates, depending on who it is going to, to people in this area. He has also built "luxury" pet houses, and even an oversized water fountain, just using pallets and scrap materials he picks up from places. Since we live in an area known for major cold and snowfall, he even used recycled materials to make an outdoor shelter for the kids in our neighborhood to wait in until the bus comes. He tells me all the time, what y
  23. Moses, to update this one, we actually put closer to 2 cases in it before it read full, and because i had never done one of these before, i sent it to a friends shop just to double check, and they added another 2 qts, for a total of 23 qts. According to the ford dealer though, that isnt unheard of, as some of the explorers of that year range had a massive inline trans cooler. Filling it ended up not being as bad as i had expected, except for the fact that when i set up the pump, i accidentally laid the hose over the exhaust, instead of the frame, which caused it to start to melt the hose. Luck
  24. An update on this one. After 5 returns, we finally got an ECM that actually worked, only to have the car quit a week later for a bad cam sensor, then quit a few days later for a bad starter, then, a week after that, both rear struts collapsed at the same time. Now though, hopefully it is all done and over with.
  25. Moses, i know this post is a bit old, but a bit of clarification here. Even though the factory manual only shows the 46RH, the 1992 to 1995 Dakota actually used 3 different transmissions, depending on certain factors. The 42 as well as the 44 from 1992 to 1995 will work, if they have the round, white, 3 wire plug, but ONLY from another Dakota, as other parts, such as torque converter, and rear output housing are set up different than on the bigger trucks, and the mounts arent interchangeable from the fullsize to the Dakota. Some of the v-8 trucks, most notably the base model 4x4 used the exact
×
×
  • Create New...