Jump to content

Tellico40

Members
  • Posts

    5
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I went straight to the MLPS as you suggested. I checked out good, but alignment was in question next according to your feedback. Not having a tool to set the MLPS, I used Kentucky windage. I angled the sensor a small bit toward the out put shaft. It is ALIVE!!! It shifts!!! May need a small bit more adjustment having back up lights that blink when going to reverse.... it I had NO BLINK before following your instructions. I am ecstatic. Thank you, Moses for your help. You are the man!
  2. The truck does go into reverse...noticed the reverse lights are not lit...and there is no slippage in drive or reverse.
  3. My tranny will not shift unless I column shift from 1 to 2. It will not go to 3rd. I will go into reverse. I have checked fuses. Cleaned up ground connects. I have a working speedometer which should rule the vss. The screws are tight at the column shifter and shift cable connection. The shift lever seats in each detent for each gear. Cable does not appear to need adjustment. Column shift indicator lines up with selected gears. I have purchased but not broken the packaging on a new neutral safety switch....hoping to be able to return it. I have verified the truck will not start in any gear but park. What have I missed? I replaced body mount bushings. Prior to that the tranny was great.
×
×
  • Create New...