LPMTech

Thank you sir.

Do you have a recommended manufacturer of these cylinders? I guess I am going to pull the transmission again.... So I want a good one.

I have an 89 Jeep YJ with the 2.5 ltr and the AX15 5 speed transmission. I have recently replaced the clutch, pressure plate, pilot bearing, Clutch hydraulic bearing/cylinder and the clutch master cylinder. The problem I am having is the clutch releases perfectly at time, and at others not at all. I have bled the system and even taken it to a shop and had it bled. I have even had the shop replace the clutch master cylinder again, thinking the first new one was bad. When the clutch sticks, you can pump the pedal several times and it will release. There are no leaks and no fluid loss. I am starting to think that I am not moving enough fluid to release the clutch. Note that the problem does seem to get worse as things get warmer, but not much warmer with driving, usually with 2-3 blocks of the house. I guess my question is, is there a clutch master cylinder that displaces slightly more fluid/pressure that I should be looking for, because everything is new, and again no leaks. Thanks for any advice