Jump to content

jawalter

Members
  • Posts

    2
  • Joined

  • Last visited

  1. Hello Moses, Thanks for the reply. I used a NLGI No. 2 lithium grease that I picked up at Advance Auto Parts. Should I try to add a different molybdenum type grease like the Texaco Starplex II to the centering ball? When the centering ball cavity is full of grease, will the excess grease just squirt out around the grease gun needle tip? That seems to be what is happening in my situation. Jeff
  2. I was using a needle point grease gun tip to inject grease into the front drive shaft CV joint [Double Cardan Joint] to lubricate the centering ball on my 1985 K5 Blazer. The grease fitting is the female flush type. I can't seem to pump any more grease into the joint. The grease squirts out between the needle tip and the flush fitting. I'm not sure if the flush grease fitting is clogged or the grease cavity is full. Any thoughts? I'll attach a couple of pictures that I got off of the internet to illustrate the CV joint and the flush type grease fitting.
×
×
  • Create New...